RP-Plaster | Thermal Insulation Plaster
Industrial heat and water insulation plaster composed of polymeric resin and inorganic refractories with high heat and chemical resistance, free of heavy metals. It is a single component thermal insulation plaster that can be easily applied with its reinforced structure against thermal shocks.
Industrial heat and water insulation plaster composed of polymeric resin and inorganic refractories with high heat and chemical resistance, free of heavy metals. It is a single component thermal insulation plaster that can be easily applied with its reinforced structure against thermal shocks.
PRODUCT FEATURES & ADVANTAGES
- It has a low thermal conductivity value.
• %50’ye varan ısı ve enerji tasarrufu sağlar.
- Protects the heat balance of the building.
- It has fire retardant properties.
- Isolates the surface against water.
- It can be applied in desired thickness.
- Provides high thermal insulation.
- It has thermal stability.
- Can be applied with a gauge.
- It does not collapse and swell.
- Provides high strength.
- It has rigid elasticity.
- Hygienic (does not contain germs etc.)
- Free of heavy metals.
- It has a thixotropic structure.
- Ready to use.
- Water based.
- He breathes.
- No condensation on the surface.
- Produced in desired color.
APPLICATION
- Always read the instructions before using the product.
- Open packages should not be used and the supplier should be contacted.
- The area to be treated must be free of oil, dirt, lifted or shedding parts.
- In large surface applications, the desired thickness can be achieved with the level adjustment apparatus or ano lath.
- Application temperature is +5 °C +40 °C.
- Apply RP-PRIMER as primer and allow to dry for 12 hours.
- Opened package should be mixed with a low speed mixer.
- The product should be applied in two coats without adding water or solvent.
- On existing painted surfaces; RP-PLASTER plaster can also be applied with a steel trowel and spray pump 12 hours after RP-PRIMER application.
- When plastering is interrupted for a long time, it should be mixed again before plastering again. This is an extremely sensitive and important issue in terms of product efficiency.
- At least 48 hours after application, a finishing coating should be applied.
- Ventilation should be provided during indoor application and long periods of airless conditions should be avoided.
- Avoid contact with skin and eyes.
- Hands and tools can be cleaned with water when wet.
- Dried materials cannot be used.
AREAS OF USE
It is suitable for use in residences, public buildings, production facilities, warehouses, warehouses, hangars, cold storages and many other domestic and industrial areas.
CONSUMPTION
Depending on the application surface; 4 kg/m² for 10 mm thickness.
PACKAGING
15 kg (Plastic Bucket) / 120 kg (Barrel) / 2.5 kg (Plastic Bucket)
STORAGE & SHELF LIFE
1 year in unopened original packaging at room temperature.
*These data are general information. It varies according to the ground to be applied.
