RP-Primer White | Filled Primer
RP-Primer White It is an acrylic based surface preparation primer specially prepared for mineral plaster, interior and exterior paints. Makes the surface water impermeable before coating. Adheres particles prone to dusting and prevents them from detaching from the surface. Adjusts surface alkalinity when applied on new plaster. Provides stronger adhesion of the coating. Integrates with the material to be applied on it and increases its adherence.
PRODUCT ÖVULNERABILITIES & ADVANTAGES
- Isolates the surface against water.
- It has a breathing feature.
- It covers capillary cracks.
- Non-flammable and non-flammable.
- No harmful effect on human health. Odorless.
- Saves consumption of the product to be used.
- Stabilizes surface alkalinity.
APPLICATION
- Always read the instructions before using the product.
- Open packages should not be used and the supplier should be contacted.
- The area to be treated must be free of oil, dirt, lifted or shedding parts.
- For primer application; it is thinned with clean water at a ratio of 1/1 and applied as a single coat under exterior and interior coatings.
- In coating primer applications, application is made after 12 hours when complete drying is achieved.
- Opened package should be mixed with a low speed mixer.
- It is used as mortar water for screed and repair materials by diluting with 1/2 ratio of water. Increases consistency and adherence. Reduces the risk of mortar burning.
- When the primer application is interrupted for a long time, it should be mixed again before starting the application process again.
- Ventilation should be provided during indoor application and long periods of airless conditions should be avoided.
- Avoid contact with skin and eyes.
- Hands and tools can be cleaned with water when wet.
- Dried materials cannot be used.
Implementation Considerations and Implementation Methods
- It can be applied on all types of surfaces to be plastered and painted.
- It is used by diluting with water. When diluted 1/1, it penetrates 0.5 cm deep into the plastered surface.
- It is applied with a roller or brush.
- The application surface must be free from excessive dirt and dust.
- The tools are cleaned with water when wet and with thinner or mechanically after drying.
- When applied to the mouth and eyes, rinse with plenty of water.
AREAS OF USE
Can be used under all facade claddings.
It can be used in plasters and screeds, repair mortars, concrete repairs where adherence is required.
CONSUMPTION
0.15 lt/m² according to surface absorbency
PACKAGING
18 lt (Plastic Bucket)
STORAGE & SHELF LIFE
1 year in unopened original packaging at room temperature.
*These data are general information. It varies according to the ground to be applied.
