RP-Siloxane | Waterproofing Solution
RP-Siloksan silane siloxane-added, low viscosity, transparent and water-based ready-to-use protective material. It provides water repellency and resistance against atmospheric gases on the impregnated surface.
RP-Siloksan silane siloxane-added, low viscosity, transparent and water-based ready-to-use protective material. It provides water repellency and resistance against atmospheric gases on the impregnated surface.
PRODUCT FEATURES & ADVANTAGES
- It has strong water repellent properties.
- Transparent, it causes color and appearance change on the applied surface.
- Permeable to water vapor. Allows the surface to breathe.
- Increases the resistance of the applied surface to climatic conditions and atmospheric gases.
- It increases the dirt retention resistance of the applied surface and enables easy cleaning.
- Long lasting.
- Prevents dusting.
- Easy to use.
APPLICATION
- Always read the instructions before using the product.
- Open packages should not be used and the supplier should be contacted.
- The area to be treated must be free of oil, dirt, lifted or shedding parts.
- Opened package should be mixed with a low speed mixer.
- It should be applied with a brush, roller or spray gun until the surface becomes full.
- Care must be taken that the material does not run off the surface.
- The product should be applied in two coats without adding water or solvent.
- Wait approximately 6 hours between coats.
- On very absorbent surfaces, the second coat can be applied after waiting for the first coat to dry.
- When the application is interrupted for a long time, it should be mixed again before reapplication.
- Avoid contact with skin and eyes.
- Hands and tools can be cleaned with water when wet.
- Dried materials cannot be used.
AREAS OF USE
It is used indoors and outdoors, on water absorbent surfaces such as decorative bricks, aerated concrete, natural and artificial stone surfaces, matt marble and granite surfaces, historical monuments, monument surfaces, concrete and cement based surfaces in order to protect them from the effects of atmospheric gases. It is used to protect concrete surfaces against wear caused by water, salt, chlorine and alkalis.
CONSUMPTION
0,150 Lt / m² depending on the absorbency of the surface
PACKAGING
5 lt PE Canister / 2.5 PE Canister
STORAGE & SHELF LIFE
1 year in unopened original packaging at room temperature.
*These data are general information. It varies according to the ground to be applied.
