RP-RED 163 | Pool and Terrace Leak Repair Chemical
RP-RED163 Pool and Terrace Leak Repair Chemical is a powerful product with the ability to close the leaks occurring on wet floors on site. It provides a permanent solution in the areas where it is used.
RP-RED163 Pool and Terrace Leak Repair Chemical is a powerful product with the ability to close the leaks occurring on wet floors on site. It provides a permanent solution in the areas where it is used.
AREAS OF USE
It can be easily used in swimming pools, ornamental pools, terraces, concrete surfaces, balconies, bathrooms, toilets and in every situation where water meets the concrete surface.
THINGS TO BE CONSIDERED BEFORE APPLICATION
- Weather conditions are important for application. It should not be used in open areas exposed to the burning rays of the sun. Evening hours should be preferred for use in these and similar areas.
- Since freezing may occur in cold weather, it is recommended to be used when the air temperature is 6 -10 °C and above.
- The application area should be cleaned beforehand and the floor should be wetted.
- All water drains in the application area should be closed.
- In environments where the floor is oily (dining hall, etc.), the floor should be cleaned from the oil layer and cleaned before application.
- The amount of product to be used must be determined correctly. The amount of product in the application will vary according to the condition of the joint on the wet ground.
- On concrete surfaces, 1 liter of product should be used for 2 m² area.
- On floors with old, long-used and worn joints, 1 liter of product should be used per 3 m² area, as invisible cracks may occur.
APPLICATION
- Pour half of the amount determined for the application onto the pre-wetted floor. Prioritize the areas where you suspect there is a leakage and spread it all over the floor with the help of a brush. The chemical is moved on the floor with a brush at intervals of one hour. In this way, the product will gain more reaction and increase its potency. This is valid for the first 5 hours after application.
- After 5 hours, the remaining 1/4 of the product is diluted and poured. The product is spread over the entire surface with a brush. Leave to wait. Since our concentrated product is diluted and thinned in the second application, it will reach the capillary cracks more easily. After the second application, wait for a period of 6 to 12 hours and wash the surface. The drains closed during the application are opened, the floor is washed with plenty of water and the surface is cleaned of all residues.
*These data are general information. It varies according to the ground to be applied.
