RP-Glass Plaster | Glass Particle Ready-Mixed Plaster
RP-Glass Plaster Acrylic emulation based, interior and exterior ready-to-use plaster containing glass particles applied with a trowel.
RP-Glass Plaster Acrylic emulation based, interior and exterior ready-to-use plaster containing glass particles applied with a trowel.
PRODUCT FEATURES & ADVANTAGES
- Idecorative with its sparkling appearance.
- Water resistant.
- With its high water vapor permeability, it allows water vapor to be discharged unhindered and allows buildings to breathe.
- Alkaline resistant.
- It is not affected by severe weather conditions such as UV, extreme cold or heat, rain, snow, humidity, does not swell, crack or fade.
- Since it does not contain solvents, it does not smell and does not harm human and environmental health.
APPLICATION
The application surfaces should be cleaned from dust, dirt and oil that reduce adhesion, and should be completely cleaned from old and blistered paint layers and made dry, healthy and clean. Wait at least 28 days for the surface to cure before applying on new mineral surfaces. All isolation measures related to the water of the building must be taken.
- Old synthetic-based surfaces are thoroughly sanded and sanding dust is removed from the surface.
should be removed from it.
- The surface should be primed with RP- PRIMER WHITE (Filled Primer) in a color suitable for the selected plaster color.
- RP-Glass Plaster should be mixed until it becomes homogeneous.
- In cases where the plaster has lost its water for various reasons, it can be added
nothing except clean water added until the application consistency is reached.
material should not be added.
- After the primer has dried, RP-Glass Plaster is applied to the glass with a stainless steel trowel.
particles thick, should be spread evenly on the surface.
- Application tools should be washed with water immediately after use.
- During the application and for 24 hours thereafter, the environment and
The temperature of the application surface should be minimum +5°C and the surface
should not receive rainfall.
- Very hot weather, direct sun, strong wind, fog,
application in weather with high relative humidity or precipitation expectation-
should not.
- Extremely hot surfaces should be moisturized before application.
- Same charge number to avoid tonal differences
care should be taken to use products. Different charges to be used
all the required amount should be mixed in advance.
AREAS OF USE
It is applied on new mineral surfaces such as black plaster, concrete, cement board and old painted surfaces on interior and exterior facades.
CONSUMPTION
4.0 - 5.0 kg/m² depending on the roughness of the surface
PACKAGING
18 KG (Plastic Bucket)
STORAGE & SHELF LIFE
It should be stored in its unopened package between 5 - 35°C.
*These data are general information. It varies according to the ground to be applied.
