RP-Waterproof Fiber Waterproofing Coating
RP-Waterproof fiber acrylic copolymer based polypropylene-micro fiber reinforced liquid insulation coating material. It has superior properties than the existing materials used for waterproofing and when it dries, it is a long-lasting insulation material that can be easily applied to all kinds of floors, brings solutions to your problems, can be colored and is impermeable with fibers.
RP-Waterproof fiber acrylic copolymer based polypropylene-micro fiber reinforced liquid insulation coating material. It has superior properties than the existing materials used for waterproofing and when it dries, it is a long-lasting insulation material that can be easily applied to all kinds of floors, brings solutions to your problems, can be colored and is impermeable with fibers.
PRODUCT FEATURES & ADVANTAGES
-Fibrous waterproofing coating is waterproof.
- It has semi-fluid properties. It can easily cover even difficult surfaces.
- It is fiber reinforced.
- Provides excellent adhesion to all kinds of building materials.
- Resistant to weak chemicals and U.V. radiation.
- Allows inhalation on surfaces.
- Decorative. Produced in white.
- Can be tested outdoors after 48 hours.
APPLICATION
- Always read the instructions before using the product.
- The opened package should be mixed at low speed.
- Open packages should not be used and the supplier should be contacted.
- When painting is interrupted for an extended period of time, it should be re-mixed before resuming the painting process.
- Surfaces on which fibrous waterproofing coating will be applied must be sound and free from all kinds of dirt, oil and dust.
- It should be applied at temperatures between +5°C and +35°C, especially in dry weather.
- One coat of primer should be applied after the cleaned dry surface.
- Apply RP-PRIMER as primer and allow to dry for 12 hours.
- After primer application, 3 layers of Waterproof is applied.
- Wait 12 hours between coats to avoid cracks in the floor.
- The minimum recommended thickness is 2-2.5 mm.
- Application can be done with a paint sprayer or roller.
- Hands and tools can be cleaned with water when wet.
- Institutional material cannot be used.
AREAS OF USE
It is used for insulation of concrete, plaster, cement board, galvanized, zinc, aluminum, PVC, polyester, wood covered sloping roofs and terraces, waterproofing of exterior facades of buildings, insulation of details such as cracks, eaves, chimney bottoms.
CONSUMPTION
Depending on the application surface, consumption is 1.5 Kg / m² for an average thickness of 2-2.5 mm.
PACKAGING
18 kg (Tin Bucket) / 2.5 kg (Plastic Bucket)
STORAGE & SHELF LIFE
1 year in unopened original packaging at room temperature.
*These data are general information. It varies according to the ground to be applied.
